Y2 Heat shrink cable end cap
Keywords:
Y2 Heat shrink cable end cap
Category:
Power cable accessories and other heat shrink products
Hot-line:
Details
Introduction | |||
Cross-linked polyolefin material, coated with hot melt adhesive. It is suitable for sealing and protecting the ends of power cables, communication cables and other industrial cables. Prevent the cable from being polluted, oxidized, corroded, etc. during installation, storage and transportation. |
Fearures | |||
Operating temperature: -55~105℃ | |||
Minimum full shrinkage temperature:125 ℃ | |||
Shrink ratio: 2:1 | |||
Glue the inner wall | |||
Inflatable sealed cable is optional |
Technical Data | |||
Property | Test method | Values | |
Tensile Strength | ASTM D 2671 | ≥ 12 MPa | |
Breakdown elongation | ASTM D 2671 | ≥ 300% | |
Aging(136℃/168hrs) Tensile Strength Breakdown elongation |
ASTM D 2671 | ≥ 10 MPa ≥ 270% |
|
Water absorption(23℃/24hrs) | ASTM D 570 | ≤0.5% | |
Low temperature flexibility(-40℃/4hrs) | ASTM D 2671 | No cracks | |
Heat shock(200℃/4hrs) | ASTM D 2671 | No dripping no flow | |
Dielectric strength | ASTM D 2671 | ≥ 15 kV/mm | |
Volume resistivity | ASTM D 2671 | ≥ 1×1013 Ω.cm |
Dimension | ||||
Size | As supplied (mm) | After shrink(mm) | ||
Y2 | Inner diameter H (≥) |
Height P (common) |
Inner diameter H (≤) |
Wall thickness W (common) |
12/5 | 12 | 45 | 5 | 2.5 |
15/8 | 15 | 75 | 8 | 2.5 |
20/8 | 20 | 75 | 8 | 2.8 |
25/10 | 25 | 85 | 10 | 2.8 |
35/18 | 35 | 95 | 18 | 2.8 |
40/18 | 40 | 95 | 18 | 2.8 |
55/25 | 55 | 125 | 25 | 2.8 |
75/30 | 75 | 140 | 31 | 3.2 |
100/40 | 97 | 140 | 40 | 4.8 |
120/60 | 120 | 150 | 60 | 4.4 |
140/65 | 140 | 180 | 65 | 4.0 |
160/95 | 160 | 270 | 95 | 4.0 |
200/95 | 200 | 270 | 95 | 4.0 |
Related products
Messages