Thin wall tubing/S2(n) Halogen free flame retardant thin wall H.S.T/S2(s) Ultra thin wall heat shrink tubing/S5-150 PVDF Heat shrink tubing/S5-175 PVDF Heat shrink tubing/S9 Sillicon Rubber heat shrinkable tube/S11 Green-Yellow Heat shrink tubing/Heat shink connector/WR-01 Discrete solder sleeve wire terminators/WR-02(HDPE) Heat shrink Butt Splice/WR-02(Nylon) Heat shrink Butt Splice/JTSP Fiber Optic Protector/Automotive wiring harness/A1 Wire splice heat shrink tubing/A3 Brake/Fuel line protection heat shrink tubing/A4 Protective heat shrink tubing for automotive air-conditioner pipe/Dual wall tubing/S3 Flame retardant medium wall heat shrink tubing/S3(t) Flame retardant Thin wall heat shrink tubing/S3(n) Medium wall Halogen free heat shrink tubing/S3TV Medium wall heat shrink tubing for CATV industry/S3(h) Heavy wall heat shrink tubing/S3(c) HDPE Anti-corrosion heat shrink tubing/Bus bar tubing/S1-10 Halogen free Bus bar insulation heat shrink tubing/S1-35 Halogen free Bus bar insulation heat shrink tubing/S1(n)-10 Halogen free flame retardant Bus bar insulation H.S.T/S1(n)-35 Halogen free flame retardant Bus bar insulation H.S.T/Bus bar boots/shrouds/Cable accessories/C1 Series heat shrinkable cable accessories/C8.7/15 Series heat shrinkable cable accessories/C101 Anti-Tracking Heat shrinkable tubing/C102 Stress control Heat shrink tubing/Moulded parts/Y1 Heat shrink breakout/Y2Heat shrink end cap/CST EPDM Cold shrink tubing/T1 Heat shrinkable tape/

upolymer logo
Chinese  Spanish  Russia
Heat Shrink 1Heat Shrink 2Heat Shrink 3Heat Shrink 4Heat Shrink 5Heat Shrink 6Heat Shrink 7
Products Line
Thin Wall Tubing Thin Wall Tubing
Heat Shrink Connector Heat Shrink Connector
Automotive Wiring Harness Automotive Wiring Harness
Dual Wall Tubing Dual Wall Tubing
Bus Bar Tubing Bus Bar Tubing
Cable Accessories Cable Accessories
Moulded Parts Moulded Parts
T1 Heat Shrinkable Tape T1 Heat Shrinkable Tape
Heat Shrink Repair Sleeve  Heat Shrink Repair Sleeve
new product
CST EPDM Cold Shrink Tubing CST EPDM Cold Shrink Tubing
new product
Products >> Thin Wall Tubing >> S5- PVDF Heat shrink tubing
S5 PVDF
S5 PVDF

Flame Retardant
PDF download
 
S5 PVDF Heat Shrinkable Tubing
 
Voltage Class 1kV Ideal for applications requiring protection and see-through inspection
 
Semi-rigid high abrasion resistant anti-corrosion Heat Shrinkable tubing. Ideal for use in electronic, automotive, airspace, military or other applications where protection and ability to be able to see-through inspection are required
 
Applications
  In welding point, electrical wiring, wire terminals, joints, splice, connection and point of soldering
 
Features/Benefits
  Shrink Ratio: 2:1
  Semi-rigid
  Highly resistant to abrasion, mechanical damage & cut-through
  Excellent chemical and solvent resistance
  Flame retardant
  High temperature resistant (135 ºC &150 ºC &175 ºC)
 
Temperature Range
       Operating Temperature         : -55 ~ 175 ºC
       Shrink Temperature               : 175 ºC
 
Color:Black, Transparent
 
Product Code Cross References
       Raychem/Tyco    :RW-175 / Kynar
       DSG Canusa       :DERAY®KY175
       Sumitomo           : K
       3M                      :KYNAR:
       LG                      : GSHS-1675
 
Technical Details

Test Item
Test Method
Typical Value
Performance temperature range
IEC 216
-55¡æ to 175¡æ
Before aging
Tensile strength
ASTM D638
Min. 35MPa
Break down elongation
ASTM D638
Min. 150%
After aging
Tensile strength
180¡æ/168h
No lower than 70% before aging
Break down elongation
Distortion
150¡æ/h
Max. 50%
Heat resistance
300¡æ/h
No cracking
Low temperature resistance
-55¡æ/4h
No cracking
Elasticity
180¡æ/168h
No cracking
Incision modulus
--
Min. 84.4MPa
Dielectric strength
ASTM D2671
Min. 25kV/mm
Volume Resistivity
ASTM D876
Min. 1013¦¸ .cm
Copper corrosion
180¡æ/168h
No Corrosion
Copper stability
180¡æ/168h
Stable
Flame retardant
VW-1
Pass

Product Selection (S5 with Shrink Ratio 2:1)

Product Code Min wall thickness after free recovery(mm) Standard Package(m/roll)
S5-¦µ1.2
0.20
200
S5-¦µ1.6
0.20
100
S5-¦µ2.4
0.23
100
S5-¦µ3.2
0.23
100
S5-¦µ4.8
0.23
1.22
S5-¦µ6.4
0.28
1.22
S5-¦µ9.5
0.28
1.22
S5-¦µ12.7
0.28
1.22
S5-¦µ19.1
0.40
1.22
S5-¦µ25.4
0.40
1.22
S5-¦µ38.1
0.40
1.22
S5-¦µ50.8
0.45
1.22

ID: Internal Diameter

Ordering

When ordering this product, please specify 1) Product code 2) Color 3) Quantity required in  rolls
If you want more documents of our catalogue,please kindly contact with
email:sales@upolymer.com E-mail: sales@upolymer.com
back to TOP