Thin wall tubing/S2(n) Halogen free flame retardant thin wall H.S.T/S2(s) Ultra thin wall heat shrink tubing/S5-150 PVDF Heat shrink tubing/S5-175 PVDF Heat shrink tubing/S9 Sillicon Rubber heat shrinkable tube/S11 Green-Yellow Heat shrink tubing/Heat shink connector/WR-01 Discrete solder sleeve wire terminators/WR-02(HDPE) Heat shrink Butt Splice/WR-02(Nylon) Heat shrink Butt Splice/JTSP Fiber Optic Protector/Automotive wiring harness/A1 Wire splice heat shrink tubing/A3 Brake/Fuel line protection heat shrink tubing/A4 Protective heat shrink tubing for automotive air-conditioner pipe/Dual wall tubing/S3 Flame retardant medium wall heat shrink tubing/S3(t) Flame retardant Thin wall heat shrink tubing/S3(n) Medium wall Halogen free heat shrink tubing/S3TV Medium wall heat shrink tubing for CATV industry/S3(h) Heavy wall heat shrink tubing/S3(c) HDPE Anti-corrosion heat shrink tubing/Bus bar tubing/S1-10 Halogen free Bus bar insulation heat shrink tubing/S1-35 Halogen free Bus bar insulation heat shrink tubing/S1(n)-10 Halogen free flame retardant Bus bar insulation H.S.T/S1(n)-35 Halogen free flame retardant Bus bar insulation H.S.T/Bus bar boots/shrouds/Cable accessories/C1 Series heat shrinkable cable accessories/C8.7/15 Series heat shrinkable cable accessories/C101 Anti-Tracking Heat shrinkable tubing/C102 Stress control Heat shrink tubing/Moulded parts/Y1 Heat shrink breakout/Y2Heat shrink end cap/CST EPDM Cold shrink tubing/T1 Heat shrinkable tape/

upolymer logo
Chinese  Spanish  Russia
Heat Shrink 1Heat Shrink 2Heat Shrink 3Heat Shrink 4Heat Shrink 5Heat Shrink 6Heat Shrink 7
Products Line
Thin Wall Tubing Thin Wall Tubing
Heat Shrink Connector Heat Shrink Connector
Automotive Wiring Harness Automotive Wiring Harness
Dual Wall Tubing Dual Wall Tubing
Bus Bar Tubing Bus Bar Tubing
Cable Accessories Cable Accessories
Moulded Parts Moulded Parts
T1 Heat Shrinkable Tape T1 Heat Shrinkable Tape
Heat Shrink Repair Sleeve  Heat Shrink Repair Sleeve
new product
CST EPDM Cold Shrink Tubing CST EPDM Cold Shrink Tubing
new product
Products >> Dual Wall Tubing >> S3(t) Flame retardant Thin wall heat shrink tubing
S3(t)
S3(t)

Flame Retardant
PDF download
 
S3 (t) Flame retardant Thin Wall Heat Shrinkable Tubing
 
Voltage Class 1kVIdeal for insulation and waterproof protection
 
Co-extruded dual wall tubing with polyolefin outer layer for insulation, corrosion resistance, stress release and heat melt adhesive inner layer for waterproofing and mechanical stress relief.
 
Applications
  Waterproof wire or wire bundle
  Sealing of wire joints
 
Features/Benefits
  High Shrink Ratio: 3:1 & 4:1
  Halogen free, environmental friendly
  Adhesive inner layer, waterproof and seal against moisture
  Flame Resistant: UL VW-1 Grade (Outer Layer)
 
Temperature Range
       Operating Temperature         : -40 ~ 125 ºC
       Shrink Temperature              : 125 ºC
 
Color:Black
 
Certification
       Certified by UL, E236437 (Outer Layer)
 
Product Code Cross References
       Raychem/Tyco      : ATUM
       DSG Canusa         : CPA100
       Sumitomo             : W3B2
       3M                        : EPS400/EPS300
       LG                        : GSHS-3635W

Technical Details

Test item Test method Typical value
Tensile strength
ASTM D2671
 ¡Ý 10Mpa
Break down elongation
ASTM D2671
 > 400%
Tensile strength after aging
ASTM D2671
 ¡Ý 10Mpa
Break down elongation after aging
ASTM D2671
 > 300%
Flammability
UL224
 VW-1
Water absorption
ASTM D570
 ¡Ü 0.5%
Heat shock
200 ¡æ for 30 minutes
 No drop/no flow
Low temperature flexibility
-40 ¡æ for 4 hours
 No cracking
Dielectric strength
ASTM D2671, at 2500V AC
for 60 seconds
 pass
Copper corrosion
UL224, at 158 ºC  for 168 hours
 pass
Volume Resistivity
ASTM D2671
 >1014¦¸.cm

Production selection
Shrink ratio: 3:1

Product Code Min.Wall thickness After shrink (mm) Normal length(m/roll;pc/m)
S3(t)-3.2/1.0 1.0 200
S3(t)-4.8/1.6 1.1 100
S3(t)-6.4/2.1 1.0 100
S3(t)-7.9/2.6 1.4 50
S3(t)-9.5/3.2 1.4 50
S3(t)-12.7/4.2 1.5 1.22
S3(t)-15.0/5.0 1.5 1.22
S3(t)-19.1/6.0 2.2 1.22
S3(t)-25.4/8.0 2.3 1.22
S3(t)-30/10
 2.4 1.22
S3(t)-39/13 2.5 1.22
S3(t)-51/17 2.5 1.22
S3(t)-64/21 2.8 1.22

Shrink ratio: 4:1

Product Code Min.Wall thickness After shrink (mm) Normal length/pc (m)
S3(t)-4.0/1.0 1.0 1.22
S3(t)-6.0/1.5 1.1 1.22
S3(t)-8.0/2.0 1.2 1.22
S3(t)-12.0/3.0 1.4 1.22
S3(t)-16.0/4.0 1.7 1.22
S3(t)-20.0/5.0 2.0 1.22
S3(t)-24.0/6.0 2.1 1.22
S3(t)-32.0/8.0 2.4 1.22
S3(t)-52.0/13.0 2.4 1.22

ID: Internal Diameter
Ordering
When ordering this product, please specify 1) Product code 2) Color 3) Quantity Required in number of rolls
If you want more documents of our catalogue,please kindly contact with
email:sales@upolymer.com E-mail: sales@upolymer.com
back to TOP